J-Pin 300mm x 6mm
Brand:
Premium heavy duty J-pin or fixing pin 300mm x 6mm dia, widely used in a variety of applications. These steel J-pins, are tough enough to be driven into most soil types using a simple club hammer. The extra length and smaller loop enable them to be driven further and less obvious than U pins (CL4294) . Recommended to hold down fence sections where dogs or burrowing animals are likely. The re-bar J-Pin fabrication makes them a stronger holding pin than other material types, the pin straddles the mesh aperture producing a strong and robust fix to the ground. Specifications Long Leg length : 300mm - Short leg: 75mm- Steel dia re-bar: 6mm Pin width: 25mm wide O.D. 13mm I.D. Coating : BZP (Beware of thinner designs, smaller profiles and self colour pins that won't offer the same holding or longevity). Uses Fix Spun & woven membranes Fix Artificial grass Fix Weed control fabric Fix Landscaping membranes & mats Fix Grass/Turf protection meshes Fix Rabbit netting mesh to ground/embankments, preventing burrowing (Use with Hex wire F1G3250, F1C3230) Fix Badger netting for embankments, preventing burrowing (Use with X fence Badger netting F2410, F2455) Estimated pin requirements (guide only, some soil types or topography may require more or less) Initial Roll- - - - No. of pins- - -No. of pins-(additional rolls)- - Grass Reinforcement Mesh 2m x 20m 200 150 Turf Reinforcement Mesh- 2m x 30m 150 100 Badger fencing wire netting 1.58m x- 50m- -- 150 100 Badger embankment netting (as above) 395 345 Rabbit netting fencing per 50m 150 100 Rabbit netting embankment 50m 300 250 Note - if the soil is soft or you require a stronger holding you may want to consider U pins (CL4294) or Terra-pins (A1557).
Store: mcveighparker.com
Price:
0.64
GBP
Go to the store